Diagnosing Your Water
Water travels on a long journey from a water treatment facility to your household pipes. Along the way, water can pick up numerous contaminants, including sediment, silt, and microorganisms.
If left untreated, these water impurities may lead to illness, sink and bathtub stains, and mineral deposits that clog your pipes.
Do you notice that your water seems “off”? If your water tastes metallic, smells like rotten eggs, or leaves spots and stains, you may have a water quality problem. Learn how to diagnose your water based on the below characteristics:
You may have hard water. This means that your water has excessive calcium and magnesium in its supply. Wonderful and life-impacting water will measure 0 grains per gallon on a hardness scale. Water from 1 to 3.5 grains per gallon is considered hard, and 7 to 10.5 grains per gallon is considered extremely hard. This can lead to scale deposits, soap residue, and dry skin. A Water Treatment System or Scale Control System is recommended for these contaminants.
You may have chlorine and even excessive chlorine in your water supply. This can dry out hair and skin. A Whole House Filter or Point-of-Use System is recommended for this contaminant.
You may have hydrogen sulfide in your water supply. This can lead to a rotten egg or chemical smell. A Whole House Filter or Iron & H2S Filter is recommended for this contaminant.
You may have dissolved solids in your water supply. This can lead to gastrointestinal illness and foul odors. A Whole House Filter or Point-of-Use System is recommended for this contaminant.
You may have barium or cadmium in your water supply. This can lead to circulatory system and kidney system effects. A Whole House Filter is recommended for these contaminants.
You may have copper in your water supply. This can lead to gastrointestinal illnesses. A Whole House Filter is recommended for this contaminant.
You may have manganese in your water supply. This can lead to a bitter, metallic taste. A Whole House Filter is recommended for this contaminant.
You may have iron in your water supply. This can lead to stains, a metallic taste, or rusty color. An Iron & H2S Filter is recommended for this contaminant.
You may have chloride or sulfate in your water supply. This can lead to diarrhea and a salty taste. A Whole House Filter or Point-of-Use System is recommended for these contaminants.
You may have iron or zinc in your water supply. This can lead to a metallic taste. A Whole House Filter or Point-of-Use System is recommended for these contaminants.
Everwell, Inc. | 936-703-5300 | office@everwellwater.com
Copyright © 2022 Everwell, Inc. All rights reserved.